Asphalt Seal Coating

Asphalt Seal Coating

We as Asphalt Seal Coating Contractors  has been doing their services in asphalt seal coating for many years in the different areas of the Boston city. We the professional asphalt seal contractors provide all types of services in asphalt seal coating that you want and need.

Why do we need asphalt seal coating?

The purpose of asphalt seal coating is to protect the asphalt pavement and also add beauty to it. The asphalt pavement is a mixture of gravel, rock and binder. The mixture is held together by cement termed as asphalt cement. For maintaining and increasing the life of the asphalt pavement, it is necessary to do its service. There are different environmental factors such as rain, chemicals and UV rays that affect the asphalt pavers by going into it. The seepage of these into the asphalt pavement will result in the break down and degradation of asphalt. If this process continues, it will degrade and damage the surface. So it will be better if you apply the asphalt sealer at the initial stage to enhance the life of asphalt pavement.

Composition of Asphalt sealer

They are bituminous products or they are acrylic in composition. They are in emulsified liquid form mixed with water, silica sand, polymer additives and fillers. They are applied on the required place with the help of a brush, a spray or a sponge.

Types of asphalt sealers

There are different types of sealers that are available for asphalt sealcoating. Each one has its own advantages and disadvantages. These four types are

  • Fast dry
  • Acrylic
  • Asphalt-based sealer
  • Coal-tar based sealer
  • Oil-based sealer

We have all these types of sealers. Our team first visits the place for a survey. When we are done with our survey, then we select which type of sealers is best for this particular type of treatment. Then we are able to give 100% flawless result.

Important steps in asphalt seal coating

We city and town paving and masonry takes important precautionary measures while doing their services. During asphalt seal coating, the following are some of the most important tips to be taken to maximize the output of your performance. Our team considers that an application of at least two coats is necessary. The temperature during its application must be 50oC but only for 24 hours.

When there is a forecast of rain in the next 24 hours, then we avoid doing our service. As this weather condition is not suitable for this type of service. We fenced the treated area for 24 hours so that no vehicle would pass over it. Our team for asphalt seal coating is doing their best by giving outstanding results in different areas like parking areas, drive ways, any commercial and residential areas.